Speco Technologies 8TH, 4TH, 16TH user manual Time Zone, Date / Time Display, Date Display Mode

User’s Manual

5.1.3.2Time Zone

You can adjust the unit to the local time either by manually setting the date/ time and daylight saving time, or by setting this item and let unit automatically adjusts the two items mentioned above according to the time zone you select.

Please refer to the figure below and select you local time zone.

NOTE: After selecting the time zone, you MUST go to <Network Time Protocol Setup> Æ <Manually Time Sync> and synchronize the local time once, or the time zone setting will not be activated.

5.1.3.3Date / Time Display

Users are allowed to choose to set the Date / Time OSD displays in 1 or 2 rows. Use the UP / DOWN keys to change the setting. The default is to display the date / time OSD in one row.

5.1.3.4Date Display Mode

This function allows the user to set the OSD display type for the date / time. There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M” represents “Month” and “D” represents “Day”.

Use UP / DOWN keys to change the setting. The default setting is <Y/M/D> in both NTSC / PAL formats.

DVR-4TH/8TH/16TH Series	65
SPECO TECHNOLOGIES 07/10