Speco Technologies 16TH, 8TH, 4TH user manual LAN Select, LAN Setup

User’s Manual

From the System Setup menu, select <Network Setup> and press ENTER. The following menu displays. Items in this menu are described in the following sections.

	Network Setup
LAN Select	LAN
LAN Setup
Modem Setup	100
Trigger Port
Email Address
SMTP Setup
DDNS Setup
UPnP Setup

5.1.7.1LAN Select

PPPoE stands for Point-to-Point Protocol over Ethernet, which is a specification for connecting the users by Ethernet to the Internet through a common broadband medium.

This item allows you to select your service type between <LAN>, <PPPoE> or <None>; if you are using an intranet for communication, please select <LAN>, if you are using a broadband medium, such as DSL Line or cable modem, please select <PPPoE>.

If <None> is selected, then there is no need to set further LAN setting, therefore, the second item <LAN Setup> will not be accessible.

5.1.7.2LAN Setup

The network related settings in the LAN Setup menu should be associated with the network service type. If you select <LAN> for <LAN Select>, then 6th to 8th item will not be available. Select <LAN Setup> in Network Setup menu and press ENTER for setting the parameters; the menu displays as follows.

	LAN Setup
DHCP	OFF
IP	192.168.1.150
Netmask	255.255.255.0
Gateway	192.168.1.1
DNS	0.0.0.0
PPPoE Account
PPPoE Password	35min
PPPoE Max Idle
Connect At Booting	Yes
Network Restart	No

70	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10