Speco Technologies 8TH, 4TH, 16TH user manual Email Address, SMTP Setup, Email via SMTP

User’s Manual

When the trigger port that you have just modified can be allocated, the 1st item “Port allocated” will be followed by a “√” symbol indicating that the designated port is allocated. “X” indicates that the port cannot be allocated. Note that the DDNS port will be automatically changed to the same port as the trigger port. For instance, when you have set the trigger to 123, the DDNS port will be automatically changed to port 123. Therefore, when the ports are allocated, “Port allocated” and “DDNS submitted” will both be followed by the “√” symbol. The 2nd to 4th item will be discussed in section Network Restart.

5.1.7.5Email Address

This item is used to edit the e-mail address where alarm event information will be sent. Follow these steps to setup the e-mail address.

•Select <Email Address> from Network Setup menu and press ENTER. A virtual keyboard displays.

•Use Direction keys to move the cursor for selecting character.

•Press ENTER to add the selected character to the entry field.

•When done, move the cursor to <OK> and press ENTER to save the settings and exit.

5.1.7.6SMTP Setup

Simple Mail Transfer Protocol (SMTP) is a protocol for sending e-mail messages between servers. SMTP is a relatively simple, text-based protocol, where one or more recipients of a message are specified and the message text is transferred.

Select < SMTP Setup> from Network Setup menu and press ENTER; the menu displays as follows.

	SMTP Setup
Email via SMTP	On
SMTP Server
SMTP Port
SMTP Account
SMTP Password

Email via SMTP

This item enables the user to determine if the unit sends e-mail via SMTP. Select <On> to send e-mail via SMTP using direction keys; if not, select <Off>.

80	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10