Speco Technologies 4TH, 8TH Functional Keys, Power LED, Hdd Led, Alarm LED, Network LED, Rec Led

User’s Manual

Power LED

The LED should be lit when the power is connected.

HDD LED

The LED will be lit while the HDD is processing data to or from the connected HDD(s).

Alarm LED

The LED should be lit when an alarm is triggered.

Network LED

The LED should be lit when the DVR-4TH/ 8TH/ 16TH series unit is connected to a network and it should blink when any data is being transferred.

REC LED

The LED should blink while the DVR-4TH/ 8TH/ 16TH series unit is recording.

3.1.2Functional Keys

The DVR-4TH/ 8TH/ 16TH series unit’s function keys on the front panel are described below for normal operation.

CHANNEL

•In both Live and Playback modes, press any CHANNEL key to view the corresponding video in full screen. The number of the CHANNEL keys corresponds to the number of cameras supported by the unit.

•In Dome Control mode, the key “1” is used to access the Set/ Go Preset menu while the key “2” is used to hide or display the dome camera setting parameters.

•In OSD virtual keyboard, press keys 1~9 to input number 1~9, and press key 10 to input number 0.

DVR-4TH/8TH/16TH Series	21
SPECO TECHNOLOGIES 07/10