User’s Manual
PPPoE Password
This item allows the user to setup the PPPoE password. Follow these steps to setup the login password.
•Select <PPPoE Password> from LAN Setup menu and press ENTER. A virtual keyboard displays.
•Use Direction keys to select character.
•Press ENTER to add the selected character to the entry field.
•When done, move the cursor to <OK> and press ENTER to save the settings and exit.
PPPoE Max Idle
This item indicates the time that the modem connection remains active if there is no acknowledgement from the remote PC. You can select the idle time from 0 to 600 minutes. The default is 35 minutes.
Connect At Booting
The unit can connect to the Internet automatically when powered up. Select <YES> to connect at booting, otherwise select <NO>.
Network Restart
Network restart is required after changing network settings. Select <Yes> to restart the network connection. After pressing ENTER, a message “Network restarting Please stand by” will be shown on the screen. A message box will be displayed within 30 seconds.
Network restart…………………….….√
UPnP NAT setting………..……..…….X
DDNS submitted………………………√
WAN connection………………………√
The “√” symbol indicates that the device is working properly whereas the “X” symbol indicates that the device is NOT working properly. The definitions of the items on the message box are described below.
73 | |
SPECO TECHNOLOGIES 07/10 |
|
