Speco Technologies 16TH, 8TH Setting Preset Points, Iris Open, Iris Close, Focus Near, Focus Far

User’s Manual

Iris Open

Press this key to open the Iris and let in more light to the dome camera.

Iris Close

Press this key to close the Iris and let in less light to the dome camera.

Focus Near

Press this key to focus the lens of the dome camera at a near position.

Focus Far

Press this key to focus the lens of the dome camera at a far position.

Zoom In

Press this key to zoom in the lens of the dome camera. This enables the user to enlarge the designated viewing area.

Zoom Out

Press this key to zoom out the lens of the dome camera. This allows the user to get a wider range of viewing area.

4.6.5Setting Preset Points

The DVR-4TH/ 8TH/ 16TH series unit allows users to set preset positions. The maximum amount of preset points allowed depends on the brand and model of the dome camera. Follow steps below to set preset points.

•Press a Channel key to view the corresponding camera in full screen.

•Then press DOME to enter dome control mode. Then a Hint Screen, shown as below figure, will display on the screen.

•Press 2 to hide the dome control Hint Screen; press 2 again to toggle the Hint Screen.

•Use Direction keys to position the dome camera to desired position.

Hint Screen

DOME / ESC: Exit

MODE / PLAY: Iris Open / Close SEQ / FREEZE: Focus Near / Far MENU / SEARCH: Zoom In / Out ENTER: Auto Focus / Iris ←↑↓→: Pan / Tilt

CH1: Set / Go Preset

CH2: Hint Screen On / Off

CH3 / CH4: Move Speed 000%

DVR-4TH/8TH/16TH Series	55
SPECO TECHNOLOGIES 07/10