Speco Technologies 8TH, 4TH, 16TH Event Full Screen, Event Duration, Per Channel Config, Alert IP

User’s Manual

5.6.5.3Alert IP

The Alert IP must match the IP address of the computer.

5.6.5.4Alert Port

The ports for both DVR and the CMS Alert must be the same.

5.6.5.5Alert Interval

To define the time interval (1 to 255 seconds) between each alive message.

5.6.6Event Full Screen

This function allows the unit to display the alarm channel in full screen size when an alarm is triggered.

Select <None> to enable this function; select <Main> to display the alarm channel on Main Monitor when an alarm is triggered; select <Call> to display the alarm channel on Call Monitor; and select <Both> to display the alarm channel on both Main Monitor and Call Monitor.

5.6.7Event Duration

This item determines the duration of the buzzer and Alarm Out relay function after an alarm is triggered. The available event duration range is from 5 second to 999 seconds.

5.6.8Per Channel Config

This menu is used to set the Video Loss Detect, Motion Detect and Alarm In / Out function for each channel. The menu is displayed as below.

Per Channel Config
Channel Select	CH01
Video Loss Detect	OFF
Motion Detect	OFF
Detection Config	OFF
Alarm In
Alarm Out	None
Digital Deterrent-Day	OFF
Digital Deterrent-Night	OFF
Digital Deterrent-Weekend	OFF

110	DVR-4TH/8TH/16TH Series
	SPECO TECHNOLOGIES 07/10