FOCUS Enhancements FS-2E manual Technical Specifications, Inputs/Outputs

Reference

5.1 Technical Specifications

5.1.1 Inputs/Outputs

Input/Outputs

Component - Y, Pr, Pb (3 x BNC in, 3 x BNC out)

SMPTE

•100% white at 700mv with 300mv Sync

•700mv Chroma levels (100% color bars)

•Setup default to OFF

•Chroma offset default to OFF

Betacam

•100% white is at 714mv with 286mv Sync

•4/3 Chroma boost to 934mv p to p

•Setup default to ON

MII

•100% white is at 700mv with 300mv Sync

•Black to White range is restricted to 647mv (700-setup)

•Setup is ON

Sync (1 x BNC in, 1 x BNC out)

Composite (1 x BNC in, 1 x BNC out)

Monitor Video Out - Composite (1 x BNC)

General Composite Specifications

•	Differential Phase	2 Degree maximum
•	Differential Gain	2% maximum
•	Hue Accuracy	1 Degree
•	Signal/Noise Ratio	Greater than 54 dB
•	Bandwidth	5.5 MHz
•	K Factor % @ 2T	1 % maximum
•	Y/C Delay	Less than 25 nS
•	Subcarrier locking range	100Hz
•	Subcarrier free-run frequency	+/- 30 Hz
	(NTSC or PAL Fsc deviation)
•	Genlock Horizontal adjustment range + 4 uS
•	Residual Subcarrier	Less than 0.5 IRE
•	SC Phase	Less than 2 degrees

S-Video - Y/C (1 x 4-pin DIN in, 1 x 4-pin DIN out)

Levels Adjustments

•	Video Gain	- +/- 20% 2mv resolution
•	Chroma Gain	- +/- 20% 2mv resolution
•	Setup	ON
		(adds 7.5 IRE, or 53mv to luminance channel)
		OFF (no change to luminance channel)

Serial Digital - SD-SDI (1 x BNC in, 1 x BNC out - conforms to the

SMPTE 259M standard)

•The FS-2E outputs embedded audio in the SDI output stream. This feature is only available for the FS-2E.

Timecode (1 x BNC in, 1 x BNC out)

Balanced Audio (2 x XLR in, 2 x XLR out)

FS-2/2E Studio DTE Disk Recorder User Guide 112