Introduction
8.Pr Input - For connecting the Pr signal from component input sources. Pr Output - For output of the Pr signal to component devices
9.Sync Input - For connecting the Sync signal on non sync on green component sources.
Sync Output - For connecting the Sync signal to non sync on green component devices.
10.Timecode Input - For connecting external analog VITC timecode sources.
Timecode Output - For connection to external analog VITC timecode devices.
11.Reference Video - For reference video loop through.
To use this Reference Video input, select REF VIDEO from GENLOCK in the SETUP menu. If the
12.AES/EBU Digital Audio Input and Output - For connecting AES/EBU input sources or output to AES/EBU devices.
13.Stereo Audio Monitor Output - For connection of audio monitors.
14.Balanced Analog Audio Input Channels 1 and 2 - For connecting balanced analog audio input sources.
Balanced Analog Audio Output Channels 1 and 2 - For output to balanced analog audio devices.
15.AC In - Use the power cord supplied to connect to the power outlet.
The power module contains a protective fuse. Refer to Replacing the Power Module Fuse on page 15 for more information.
16.Video Monitor Output - For connection to a video monitor (composite). Use this connection to view the On Screen Display.
17.DV I/O 1 and DV I/O 2 - For connection of DV video devices. These two ports are used to pass through the DV signal. The
18.To HDD - For connecting external FireWire 400 disk drives to the
19.To Computer - For connecting the
20.Ethernet 10/100 BaseT - For connecting
11
