FS-2/2E Functions

4.Press Yes.

The following message appears.

PARTITIONING VOLUME

Select Partition to partition a connected disk drive. When an unknown volume type (HDD) is connected to the FS-2/2E, the Partition process puts a FAT32 format onto the drive. It erases any previous partition and data.

FS-2/2E Does Not Support Multiple Partitions on Drives Less Than 128GB

You cannot add multiple partitions an a single drive using the FS-2/2E.

With drives greater than 128G, the FS-2/2E creates multiple partitions. There will be a partition for each 128G of disk space available.

2.5.13.7Repair

CHECK DISK

CURRENT CLIP

EXITSEL

1.Select the desired function.

2.Press SEL to make a selection.

3.Press EXIT to return to the menu screen.

2.5.13.7.1CHECK DISK

This selection scans the entire volume for any errors.

Usually, if a file was corrupted during a recording, Check Disk alerts you of this.

FS-2/2E Studio DTE Disk Recorder User Guide 82

Page 102
Image 102
FOCUS Enhancements FS-2E manual Partitioning Volume, Check Disk, Current Clip Exitsel