FS-2/2E Functions

2.4 LCD Display

The FS-2/2E LCD screen displays different FS-2/2E modes and states. On boot up, the FS-2/2E displays the following screen:

WELCOME

TO FS-2E

PLEASE WAIT

Depending on the connected disk drive, the FS-2/2E may or may not display Please Wait during boot up.

Once booted, if no disk drive is connected to the FS-2/2E (either through the internal slot or externally using the HDD I/O port), the following screen appears:

NO DISK

DETECTED

MENU

Insert a drive into the front panel drive bay or connect a FireWire disk drive to the HDD I/O port.

If you received a drive from Focus Enhancements, it should be configured and ready to use. If the message No Disk Detected appears, make sure the drive is inserted properly.

If the message No Format Detected appears, you must partition and format the inserted drive before use. The FS-2/2E prompts you through the steps required to perform a format.

Warning: Formatting and Portioning Erases All Data On the Disk.

FS-2/2E Studio DTE Disk Recorder User Guide

26

Page 46
Image 46
FOCUS Enhancements manual LCD Display, Welcome To FS-2E Please Wait, No Disk Detected Menu