FOCUS Enhancements FS-2E manual Ftp, Telnet WEB Exit SEL

FS-2/2E Functions

2.5.12.20.3 VIEW IP INFO

IP000.000 000.00

MSK255.255 255.000

GW000.000 000.000

NEXT

In cases where DHCP is being used, by selecting VIEW IP INFO, you can see the IP address that the network has provided the FS-2/2E.

If the FS-2/2E is not connected to a network or was not able to successfully log on, this screen displays DHCP DISABLED NOT CONNECTED. Check your settings or contact your system administrator for further assistance.

2.5.12.20.4 SERVICES

FTP

TELNET

WEB

EXIT SEL

The SERVICES menu allows you to enable or disable any of these services: FTP, TELNET, or WEB connection. With each, it is necessary to enable or disable the function within the submenu.

Once FTP is enabled you can use your web browser or ftp utility to transfer files to and from the FS-2/2E.

With TELNET enabled, you can send commands to control the FS-2/2E with a telnet utility.

With WEB enabled, you can control the FS-2/2E from your web browser. Type in the FS-2/2E IP address into the address bar of your browser to start using the web interface. Only an FS-2E or FS-2 (with the 2.0 firmware upgrade) has this option available.

FS-2/2E Studio DTE Disk Recorder User Guide

73