Introduction
•Record and recall a single frame of DV video and record user definable time- lapse sequences.
•Use trick playback modes up to 30X/-30X fast-forward and rewind speeds, reverse play, loop clip and loop entire disk.
•Control the FS-2/2E remotely using industry standard RS422 (Sony 9-pin), FireWire (for starting record/pause or AV/C) from a DV based camcorder 1394 port. You can also control the FS-2/2E using RS-232C (using the optional wired remote control available as an accessory). The FS-2E, and the FS-2 (with the 2.0 software upgrade), can be controlled from your web browser using FS- 2/2E IP control. Refer to the section on the FS-2/2E Web Interface, FS-2E Web Interface on page 99.
•Create and save multiple playlists on the FS-2/2E. These can be shared between different units.
•Use the internal 120GB, 7200RPM, 3.5" IDE drive or daisy chain up to eight FireWire (IEEE-1394) hard drives together for extremely long, uninterrupted record times.
1.3Basic Applications
You can use the FS-2/2E in the acquisition stage of production, the editing/post production stage, and the presentation stage. The FS-2/2E is most useful in the following applications:
•Presentation Video Source
•Broadcast Tape Deck Replacement
•Time Lapse Recorder
•Film-to-Disk Transfer
•NLE/Linear Edit Source/Recorder
•Endless Video Program Looping
•Security Recorder/Player
•Medical Recorder/Player
•Industrial Monitoring
•Video DJ and Karaoke Player
•Outside Broadcast
1.4Receiving, Unpacking, and Inspecting
Upon receipt of the FS-2/2E unit, examine the shipping container. If there is evidence of damage or rough handling, have an agent of the carrier present when the equipment is unpacked.
Unpack the equipment carefully. Inspect it for scratches, dents, or cracks. If the equipment is damaged, save all packing materials and notify both Focus Enhancements and the carrier immediately.
FS-2/2E Studio DTE Disk Recorder User Guide
