FOCUS Enhancements FS-2E manual Recorder Configuration, Failed to Change Value Please Try Again

FS-2/2E Menus

FS-2E Web Interface

4.2.4 Recorder Configuration

Use the Recorder Config form to set up the FS-2E recorder function. The FS-2E provides the following Recording Settings:

For specific details about the parameters listed below, see and Functions on page 30 and Using the FS-2/2Eon page 85.

•Input Select - Pick the type of input signal:

•Composite,

•YC,

•Component, default

•SDI,

•DV,

Failed to Change Value Please Try Again

The FS-2E detects if the selected input signal type is present. If the selected signal is not online, the message Failed to Change Value Please Try Again appears. Verify that the type of input signal and reset the Input Select field.

•Record Mode:

To start recording, click on the Record button. To stop recording, click on the Stop button.

•Normal, default

•Retro Disk,

•Retro Cache,

•Loop Record,

•Still,

•Time Lapse,

FS-2/2E Studio DTE Disk Recorder User Guide

105