Introduction

1.5 Installation and Site Requirements

Focus Enhancements recommends that FS-2/2E units be installed in a restricted access area, such as an equipment room or closet and the installation be performed by trained installers.

The units are designed and tested to operate reliably between +5 - +40C (41 - 104 F). To maintain this range, consider the following:

Air temperature surrounding the equipment must remain within the specified range.

Air flow around the equipment must be sufficient to maintain proper operating temperatures

If in doubt about the site temperature, take measurements to be certain. If measured temperatures fall outside the defined ambient temperature range, you must bring the temperature within the defined range.

Storage temperature for the units must remain between -20 - +60C (-4 - 140 F).

FS-2/2E Studio DTE Disk Recorder User Guide

5

Page 25
Image 25
FOCUS Enhancements FS-2E manual Installation and Site Requirements