Installation (continued)
Single Stage Installation
In a Single Stage installation, there are no additional KVM switches daisy chained or cascaded down from the first unit. To set up a single stage installation, refer to the diagram on p.9 (the numbers in the diagram correspond with the numbers of the instruction steps), and do the following:
1.Connect the Console to the Console Interface Module
Plug your keyboard, mouse, and monitor into their respective ports on the Console Interface Module. Each port is marked with an icon to indicate itself.
Note: The diagram shows the rear panel of both the
2.Connect the Console Interface Module to the B060-032/B060-016-2
Use Cat5e cable to connect the Link port of the module to one of the Console ports on the
Note: The distance between the Console Interface Module and the
3.Connect the B060-032/B060-016-2 to the Server Interface Module
Use Cat5e cable to connect any available CPU Port to a Server Interface Module that is appropriate for the computer you are installing.
Note: The distance between the
4.Connect the Server Interface Module to the Computer
Plug the connectors on the Server Interface Module into the appropriate ports of the computer you are installing.
Note: Repeat steps 3 and 4 for all the computers you wish to connect. Up to 32 computers can be con- nected in this fashion.
5.After all computers have been cabled up, plug the female end of the power cord into the
6.For each Console Module, plug its power adapter into an AC source; plug the power adapter cable into the unit’s power jack.
7.Turn on the power to the B060-032/B060-016-2.
8.Turn on the power to the computers.
8
