OSD Operation (continued)
CLEAR THE NAME LIST | This is similar to Restore Default Values. The difference is that it |
| also clears the Names settings along with undoing all changes and |
| returning the setup to the original factory default setting. |
ACTIVATE BEEPER | Choices are Y (for Yes), or N (for No). When activated, the beeper |
| sounds whenever a Port is changed; when activating the Auto Scan |
| function (see F7 SCAN, p. 25); or an invalid entry is made on an |
| OSD menu. The default is Y (activated). |
SET QUICK VIEW PORTS | This function lets the Administrator select which Ports to include |
| as Quick View ports. |
| • To select/deselect a port as a Quick View Port, Double Click the |
| port you want, or use the Navigation Keys to move the highlight |
| bar to it, then press [Enter]. |
| • When a port has been selected as a Quick View Port, an arrowhead |
| displays in the QV column of the LIST on the Main Screen to |
| indicate so. When a port is deselected, the arrowhead disappears. |
| • If one of the Quick View options is chosen for the LIST view |
| (see F2 LIST, p. 21), only a Port that has been selected here will |
| display on the List. |
| • If one of the Quick View options is chosen for Auto Scanning |
| (see SCAN/SKIP MODE, p. 22), only a Port that has been |
| selected here will be Auto Scanned. The default is for no ports to |
| be selected. |
SET ACCESSIBLE PORTS | This function lets the Administrator define Operator access to the |
| computers on the installation on a |
| For each Operator, select the target Port; then press the [Spacebar] |
| to cycle through the choices: F (Full access), V (View Only), or |
| blank (No access). Repeat until all access rights have been set, then |
| press [Enter]. The default is F for all users on all Ports. |
| Note: A blank setting means that no access rights are granted. The |
| Port will not show up on the User's LIST on the Main Screen. |
SET ACCESS TIMEOUT | If there is no input from the console accessing a particular port for |
| the amount of time set with this function, the port is released, |
| allowing it to be accessed by the other consoles. |
| To set the timeout value, key in a number from 0 - 255 seconds, |
| then press [Enter]. |
| If the number is 0 [zero], this function is disabled. The default is |
| 5 seconds. |
SET KEYBOARD LANGUAGE | This function allows the Administrator to define the keyboard |
| language layout for each port. To assign a keyboard language, |
| select the target port; then press the [Spacebar] to cycle through |
| the choices: US English; Japanese; or French. |
| The default is US English. |
SET OPERATING PLATFORM | This allows the Administrator to define the operating platform for |
| the system connected to each port. To assign an operating platform, |
| select the port; then press the [Spacebar] to cycle through the |
| choices: Windows (PC compatible); Mac; and Sun. |
| The default is Windows (PC compatible). |
BUS AUTHORIZATION | This function allows the Super Administrator to authorize Operator |
| access to Stations on the installation other than the ones connected |
| to the Station the Operator is logged in on. |
| For each Operator, press the [Spacebar] to cycle through the |
| choices: F (Full access), V (View Only), or blank (No access). |
| Repeat until all access rights have been set, then press [Enter]. |
| The default is blank - No Operators have access rights to |
| other Stations (and the computers connected to them). |
FIRMWARE UPGRADE | In order to upgrade the B060 Series KVM’s firmware, you must |
| invoke Firmware Upgrade Mode with this setting. Only the Super |
| Administrator on the Master Station can use this function. |
|
|
24
