FOCUS Enhancements FS-2E manual Msk, Gwy, Next SEL

FS-2/2E Functions

•CustomIP - If you select CUSTOM IP, a submenu opens to ask you to enter an IP number, Sub Net Mask, and Gateway.

IP	000.000.
	000.000
MSK	255.255.
	255.000
GWY	000.000.
EXIT	000.000
NEXT	SEL

If you do not have these values, contact your system administrator. The default values for the IP address are 000.000.000.000, Sub Net Mask 255.255.255.000 and Gateway 000.000.000.000.

To modify the custom IP values use the following steps:

1.Select the item to modify.

2.	Press	to select the field to change.
3.	Use the	to increase the value (HINT: press the
	SHIFT key on the FS-2/2E front panel plus to
	decrease a value).

4.Values wrap back to zero once the maximum value has been entered.

5.To modify the next item or set of values, press the NEXT key on the FS-2/2E front panel.

6.Once complete, press the SEL key when EXIT is highlighted to exit or the NEXT key to continue to modify items.

Once you exit the menu, the FS-2/2E attempts to log into the network and one of two things hap- pen:

If the FS-2/2E successfully logs onto a network, it displays NETWORK CONNECT SUCCEEDED.

If the FS-2/2E is unable to log onto a network, it

displays NET CONNECT FAILED. CHECK NETWORK CABLE.

7.Press the VERIFY button on the FS-2/2E to take you back to the IP Settings menu to verify your values.

8.Press the EXIT button to take you back to the

SETUP menu.

FS-2/2E Studio DTE Disk Recorder User Guide

71