Dynamic Volume

`Off:

Audyssey Dynamic Volume® off.

`Light:

Light Compression Mode becomes active.

`Medium:

Medium Compression Mode becomes active.

`Heavy:

Heavy Compression Mode becomes active. This set- ting affects volume the most, causing all sounds to be of equal loudness.

Note

Even if you have selected other than “Audyssey” in “Equalizer” setting after performing Audyssey MultEQ® XT32 Room Cor- rection and Speaker Setup, selecting “On” in the

Dynamic EQ” will change the “Equalizer” setting to “Audys- sey” (53).

If you would like to use Audyssey Dynamic Volume, when using THX listening modes, set “Loudness Plus” setting to “Off” and set “Preserve THX Settings” setting to “No” (54).

When “Dynamic Volume” is set to effective, “Equalizer” is set to “Audyssey” (53) and “Dynamic EQ” is set to “On”. When “Dynamic EQ” is set to “Off”, “Dynamic Volume” becomes “Off” automatically.

When “Dynamic Volume” is set to effective, the Dynamic Vol indicator will light (9).

If Pure Audio or Direct listening mode is selected, these settings cannot be selected.

Dynamic Volume” and “Dynamic EQ” settings cannot be set if speakers B are being used.

Dynamic EQ” and “Dynamic Volume” settings cannot be used while a pair of headphones is connected.

Audyssey MultEQ XT32 then removes the distortion caused by room acoustics by capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Enabling Audyssey MultEQ XT32 allows you to also use Audyssey Dynamic EQ®, which maintains the proper octave-to-octave balance at any volume level. Before using this function, connect and position all of your speakers.

About Audyssey Dynamic EQ

Audyssey Dynamic EQ solves the problem of deterio- rating sound quality as volume is decreased by taking into account human perception and room acoustics.

Dynamic EQ selects the correct frequency response and surround levels moment-by-moment at any user- selected volume setting. The result is bass response, tonal balance, and surround impression that remain con- stant despite changes in volume. Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for deliv- ering a loudness correction solution.

Audyssey Dynamic EQ works in tandem with Audyssey MultEQ XT32 to provide well-balanced sound for every listener at any volume level.

About Audyssey Dynamic Volume

Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Dynamic Volume looks at the preferred volume setting by the user and then monitors how the volume of program material is being perceived by listeners in real time to decide whether an adjustment is needed. When- ever necessary, Dynamic Volume makes the necessary rapid or gradual adjustments to maintain the desired playback volume level while optimizing the dynamic range. Audyssey Dynamic EQ is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain the same whether watching movies, flipping between television channels, or changing from stereo to surround sound content.

En

58

Page 58
Image 58
Onkyo TX-NR3008 instruction manual Dynamic Volume

TX-NR3008 specifications

The Onkyo TX-NR3008 is a high-performance A/V receiver that has garnered attention for its impressive array of features and advanced technologies. As part of Onkyo's acclaimed line of home theater receivers, the TX-NR3008 is designed to deliver an immersive audio and video experience, making it an ideal choice for audiophiles and home theater enthusiasts alike.

One of the standout features of the TX-NR3008 is its powerful amplifier section, capable of delivering 135 watts per channel (8 ohms) across all seven channels. This ensures rich, dynamic sound reproduction, whether you are watching your favorite movies or listening to music. The receiver also supports 9.2-channel surround sound, allowing users to add external amplifiers to create a more expansive soundstage.

In terms of audio processing, the TX-NR3008 incorporates advanced DTS-HD Master Audio and Dolby TrueHD formats, which provide lossless audio quality for a truly cinematic experience. Additionally, the receiver is equipped with Onkyo's proprietary AccuEQ room calibration technology, which analyzes the acoustics of your space and optimizes sound output accordingly. This ensures that every listener experiences superior sound quality, regardless of seating position.

The TX-NR3008 also offers an array of connectivity options. With six HDMI inputs, including support for 3D video and 4K resolution, users can easily connect various devices, such as Blu-ray players, gaming consoles, and streaming devices. The HDMI capabilities extend to audio return channel (ARC) functionality, making it convenient to connect with smart TVs. The receiver also provides legacy support with composite and component video inputs, as well as digital optical and coaxial audio inputs.

Another notable feature is its built-in internet streaming capabilities, allowing users to access popular music services like Pandora, Spotify, and SiriusXM right from the receiver. Its compatibility with Wi-Fi and wired Ethernet connections adds further versatility, enabling the TX-NR3008 to be incorporated into multi-room audio setups.

In summary, the Onkyo TX-NR3008 is a formidable A/V receiver that excels in delivering top-notch audio and video performance. Its robust amplification, advanced surround sound processing, extensive connectivity options, and streaming capabilities make it an exceptional choice for anyone looking to create an immersive home theater experience. With its blend of power, precision, and versatility, the TX-NR3008 remains a strong contender in the competitive market of high-end A/V receivers.