Onkyo TX-NR3008 instruction manual Connecting the Speaker Cables, channelPlayback with Speakers A

Connecting the Speaker Cables

Screw-type speaker terminals

Strip 1/2" to 5/8" (12 to 15 mm) of	1/2" to 5/8"(12 to 15 mm)
insulation from the ends of the
speaker cables, and twist the bare
wires tightly, as shown.

Using Banana Plugs (North American models)

•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

•Do not insert the speaker code directly into the center hole of the speaker terminal.

■9.2-channel Playback with Speakers A

The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURR BACK/ZONE 3 L terminal.

Front high		Front wide				Front wide		Front high
	right		right	Front right	Front left		left		left	Center
	speaker		speaker	speaker A	speaker A		speaker		speaker	speaker

Surround	Surround	Surround	Surround
right	back right	back left	left
speaker	speaker	speaker	speaker

En

15