Linksys E2000 manual Wireless Wireless MAC Filter, Access Restriction

Models: E2000

1 59
Download 59 pages 55.99 Kb
Page 25
Image 25

Linksys E2000

Chapter 3: Advanced Configuration

 

 

Wireless Security > WEP

Encryption  Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).. The default is 40/64 bits (10 hex digits)..

Passphrase  Enter a Passphrase to automatically generate WEP keys.. Then click Generate..

Key 1  If you did not enter a Passphrase, enter the WEP key manually..

RADIUS

This option features WEP used in coordination with a RADIUS server.. (This should only be used when a RADIUS server is connected to the Router..)

NOTE: If you are using WEP encryption, each device in your wireless network MUST use the same WEP encryption method and encryption key, or else your wireless network will not function properly..

Wireless Security > RADIUS

RADIUS Server  Enter the IP address of the RADIUS server..

RADIUS Port  Enter the port number of the RADIUS server.. The default value is 1812..

Shared Secret  Enter the key shared between the Router and the server..

Encryption  Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).. The default is 40/64 bits (10 hex digits)..

Passphrase  Enter a Passphrase to automatically generate WEP keys.. Then click Generate..

Key 1  If you did not enter a Passphrase, enter the WEP key manually..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..

Wireless > Wireless MAC Filter

Wireless access can be filtered (restricted) by specifying the MAC addresses of the devices in your wireless network..

Wireless > Wireless MAC Filter

Wireless MAC Filter

Enabled/Disabled  To filter wireless users by the MAC addresses of their computers or devices, select Enabled.. Otherwise, keep the default, Disabled..

Access Restriction

Prevent PCs listed below from accessing the wireless network  Select this option to block wireless access by MAC address.. This option is selected by default..

Permit PCs listed below to access the wireless network  Select this to option allow wireless access by MAC address.. This option is disabled by default..

Advanced Wireless-N Router

25

Page 25
Image 25
Linksys E2000 manual Wireless Wireless MAC Filter, Access Restriction