Specifications
Type of material | Copper pyrites (brass), |
| |
| (not including |
| switches/remote |
| display) |
Process method | Shaped with NC |
| (Numerically Control) |
| Machine Tool |
| (not including the |
| remote display) |
Audio playing system |
|
| MiniDisc digital audio |
| system |
Laser diode properties | |
| Material: GaAIAs |
| Wavelength λ=790 nm |
| Emission duration: |
| continuous |
| Laser output: less than |
| 44.6 µW* |
| *This output is the |
| value measured at a |
| distance of 200 mm |
| from the objective lens |
| surface on the optical |
| |
| 7mm aperture. |
Revolutions | Approx. 300 rpm to |
| 2,700 rpm |
Error correction | ACIRC (Advanced |
| Cross Interleave Reed |
| Solomon Code) |
Sampling frequency | 44.1 kHz |
Coding | ATRAC (Adaptive |
| Transform Acoustic |
| Coding) |
| ATRAC3: LP2/LP4 |
Modulation system | EFM (Eight to Fourteen |
| Modulation) |
Number of channels | 2 stereo channels |
| 1 monaural channel |
Frequency response 20 to 20,000 Hz ± 3 dB
OutputsHeadphones: dedicated headphone/ remote jack, maximum output level 5 mW + 5 mW load impedance 16 Ω
Power requirements
3.7 V, 340 mAh,
6 V DC
AC power adaptor (for the battery charging stand, supplied), AC 120 V, 60 Hz
Battery operation time
See “Checking the battery’s remaining power” (page 16)
Dimensions | Approx. 87.6 × 79.0 × |
| 11.0 mm (w/h/d) |
| (31/2 × 31/8 × 7/16 inches) |
| (not including |
| projecting parts and |
| controls) |
Mass | Approx. 244 g (8.7oz) |
| (including the |
| rechargeable battery) |
US and foreign patents licensed from Dolby Laboratories.
Design and specifications are subject to change without notice.
Printed on 100% recycled paper using VOC (Volatile Organic
Additional Information
41