3 Press OPEN/CLOSE on DECK A (one of the DISC 1-5 A buttons for RCD- W500C) and place a CD on the disc tray. Press OPEN/CLOSE (or A) on DECK A again to close the disc tray.

When you perform Make-Disc Synchro- Recording, the current disc in DECK A is used to record.

When you perform Synchro-Recording, you can choose the disc which you want to record, and the play mode.

If you select “ALL DISCS” even though you want to record only one disc, discs you did not intend to record may be recorded.

4 Press CD SYNCHRO HIGH.

DECK B stands by for recording, and DECK A stands by for playing.

5 After “New Track” appears in the display, press H on DECK B to start recording.

High-Speed Synchro-Recording starts. DECK A and DECK B automatically stop after recording.

To stop recording

Press x.

Notes

•When you make Synchro-Recording in programmed order, the recording speed automatically changes to Normal speed. You can perform only Normal speed Synchro-Recording.

•If you select “ALL DISCS” even though you want to record only one disc, discs you did not intend to record may be recorded.

Normal speed Synchro- Recording

The disc is recorded at the same speed as the playing CD. You can hear the sound during recording. To use Make-Disc Synchro- Recording, set “Make Disc” in the Setup Menu to “On” beforehand (page 35).

When using the remote, set DECK A/DECK B to DECK B.

CD SYNCHRO NORMAL x H

DECK A/DECK B

CD SYNCHRO

NORMAL

H

x

1Do steps 1 to 3 of “High-Speed Synchro-Recording” on page 23.

2Press CD SYNCHRO NORMAL.

DECK B stands by for recording, and DECK A stands by for playing.

When you place a CD-R or CD-RW in the deck, the unit optimizes itself for the best possible recording and “OPC” appears temporarily in the display.

If “Not Blank” appears, make sure that the blank disc is placed correctly.

24