3 After “New Track” appears in the display, press H on DECK B to start recording.

Synchro-Recording starts. DECK A and DECK B will automatically stop after recording.

To stop recording

Press x.

To record only your favorite CD tracks

You can record only your favorite CD tracks using Program Play. Between steps 1 and 2, perform steps 1 to 4 of “Creating Your own Program (Program Play)” (page 19).

Note

When Program Play is selected, you cannot perform Make-Disc Synchro-Recording.

To record from several discs (RCD-W500C only)

In step 1, set the play mode to “ALL DISCS” or “PGM” and program the discs you want to record, then proceed to step 2.

Notes

•When the play mode is set to “ALL DISCS”, the recording starts from the disc whose indicator lights in green. Then the following discs are recorded. (After Disc 5, Disc 1 is selected).

•If you select “ALL DISCS” even though you want to record only one disc, discs you did not intend to record may be recorded.

Recording on a CD-R or

CD-RW Manually

You can start recording from the end of the existing material. Before recording, see page 20.

When using the remote, set DECK A/DECK B

Recording/Editing

 

to DECK B.

 

• After recording, you must finalize the disc.

 

Until the disc is properly finalized, it cannot

 

be played on any CD players. See

 

“Finalizing a CD-R or CD-RW” on page 29.

 

INPUT

 

OPEN/CLOSE H

 

X x REC z

DECK A/DECK B

INPUT

REC z

H

X x

1 Turn on the amplifier and the sound source, and then select the sound source on the amplifier.

2 Press OPEN/CLOSE of DECK B and place a recordable CD-R or CD-RW on

DECK B.

Press OPEN/CLOSE again to close the disc tray.

With the label side up

continued 25