3 Press INPUT repeatedly to select the input connector.
To record through | Turn on the indicator |
DIGITAL OPTICAL IN | OPT* |
|
|
ANALOG IN | ANALOG* |
* If a disc is playing on DECK A, stop playback.
To record the disc in DECK A, turn off “OPT” and “ANALOG.”
4 Press REC z.
DECK B stands by for recording.
5 Adjust the recording level, if necessary.
For details, see “Adjusting the Recording Level” on page 27.
6 Press H.
7 Start playing the sound source you want to record.
To pause recording
Press X. To resume recording, press the button again or press H.
Note
Whenever you pause recording, a new track number is added. If you paused recording while recording, the track number increases by one and recording continues on the new track when recording is resumed.
To stop recording
Press x.
“PMA Writing” appears while updating the information of the disc before stopping the recording.
To play from the beginning of the disc after recording
1 Press x again while the unit is stopped.
2 Press H.
The unit starts playing from the first track.
Notes
•If you press REC z during recording, you can add a track number (page 28). The track must be longer than 4 seconds.
•When recording from more than one disc manually, the silence between tracks may increase when changing discs. To prevent this, use Synchro- Recording.
•This unit uses the Serial Copy Management System, which allows only
•Because of the restriction of the Serial Copy Management System (SCMS), you may not be able to make digital recordings. In this case, use analog recording through the ANALOG IN jack when you record from other units. Or use
•You cannot make manual recordings of MP3 files.
•While recording the source with “OPT” or “ANALOG” selected, you cannot play a disc on
DECK A.
26