Sony RCD-W500C manual Messages

Messages

The following table explains the messages that appear in the display.

Message	Explanation
Blank Disc	A blank CD-R/CD-RW you have
	just bought or a CD-RW you have
	entirely erased is in the unit.
Check Disc	You are trying to record or edit a
	finalized disc or CD. Or you are
	trying to edit a CD-R.
Complete!	Editing has been completed
	successfully.
Data Disc	You are trying to record or edit a
	non audio CD-R/CD-RW.
	• Insert an audio CD-R/CD-RW.
Disc Full!	There is not enough time left on the
	CD-R/CD-RW or there are no
	recordable tracks available to
	complete a planned recording.
Erase	The ERASE function is operating.
Ex-Change	During CD playback, you remove
(RCD-W500C	and insert another CD.
only)
Fade In	The FADE IN REC function is
	operating.
Fade Out	The FADE OUT REC function is
	operating.
Finalize	The FINALIZE function is
	operating.
Incomplete!	Editing has not completed
	successfully due to vibration of the
	unit or a dirty or scratched disc.
Initialize	The unit does not memorize the
	Setup Menu settings or the
	previous playback state.
Name Full!	The number of characters used for
	the track or disc names is beyond
	the maximum.
-NO DISC-	There is no disc in the unit.
No Name	There is no title.

Message	Explanation
Not Blank	You have tried the Make-Disc
	Synchro-Recording, with a disc
	that is not blank.
	• Use a blank disc for the Make-
	Disc Synchro-Recording.
OPC	OPC: Optimum Power Control
	The unit is optimizing itself for
	best possible sound.
OPC Over	The number of times OPC
	recording has been performed 90
	times.
	• Stop the recording and finalize
	the disc.
-Over-	The playback of the last track is
	over.
	• Turn AMS counterclockwise (or
	press . or m on the remote).
PMA Writing	PMA: Program Memory Area
	A disc’s information is being
	updated.
Push STOP!	You operate the unit not in the
	STOP mode.
	• Stop the unit, and then operate the
	unit again.
-Retry-	Recording or editing has been tried
	again.
Step Full!	The number of programmed tracks
	has reached the limit, and you
	cannot program any more tracks.
	• Before you program a new track,
	erase the current program and
	restart a new program procedure.
TEXT Edited	A disc whose text has been edited
	but has not been finalized is
	inserted, and OPEN/CLOSE has
	been pressed.
	• Finalize the disc, and then press
	OPEN/CLOSE to remove the
	disc. If you want to remove the
	disc before finalizing it, press
	OPEN/CLOSE again while
	“TEXT Edited” is displayed.
Unfinalize	The UNFINALIZE function is
	operating.

36