The point where you stopped playing is cleared when:

you open the disc tray.

you play another title.

you switch the Title List menu to Original or Playlist (DVD-RW in VR mode only).

you edit the title after stopping playback.

you change the settings on the recorder.

you turn off the recorder (VIDEO CD/CD/ DATA CD only).

you make a recording (except for DVD-RWs in VR mode).

To play restricted DVDs (Parental Control)

If you play a restricted DVD, the message “Do you want temporarily change parental control to *?” appears on your TV screen.

1Select “OK” and press ENTER.

The display for entering your password appears.

2Enter your four-digit password using the number buttons.

3Press ENTER to select “OK.” The recorder starts playback.

To register or change the password, see “Parental Control (DVD VIDEO only)” (page 93).

To lock the disc tray (Child Lock)

You can lock the disc tray to prevent children from ejecting the disc.

When the recorder is in standby mode, press

ORETURN, ENTER, and then {/1 on the remote.

“LOCKED” appears on the front panel display. The Z (open/close) button does not work while the Child Lock is set.

To unlock the disc tray, press O RETURN, ENTER, and then {/1 on the remote again when the recorder is in standby mode.

One Touch Play

If you use the SMARTLINK connection, you can easily start playing.

When the TV is turned on or in standby mode, insert a disc and press H. The recorder automatically turns on and the TV’s input is switched to the recorder. Playback starts automatically.

One Touch Menu

If you use the SMARTLINK connection, you can easily display the Title List.

When the TV is turned on or in standby mode, insert a disc and press TITLE LIST. The recorder automatically turns on and the TV’s input is switched to the recorder. The Title List menu appears.

z Hints

 

• You can also use the H button in step 4 (page 52) to

 

start playback.

 

• Even if a timer recording starts during playback,

 

neither the recording nor playback will stop (page 58).

 

• Even if you select “Factory Setup” in Options Setup

 

(page 95), the Child Lock remains set.

Playback

 

,continued 53