To stop during recording

Open the remote’s cover and press x REC STOP. Note that it may take a few seconds for the recorder to stop recording.

Notes

•The disc may not be recorded as programmed if the tape’s time code is not sequential or there are blanks between the recordings on the tape. In this case, see “Recording From Connected Equipment Without a Timer” (page 51).

•The start and end points of a program may be different from what you have set if the source DV format tape is in any of the following conditions:

–Recording mode was changed during the recording.

–There is a blank space in the recorded portion of the tape.

•If you set the beginning of the tape as the IN point and the end point as the OUT point, the IN and OUT points may change slightly during dubbing.

•You cannot set a scene to be shorter than one second.

Advanced Program Edit

-RWVR

By using an additional DVD-RW (VR mode) disc, you can quickly edit contents of a DV format tape, and dub the edited contents to another disc.

1Copy all and

edit the

2 Dub the

contents.

edited

 

contents.

 

DVD-RW

 

(VR mode)

To use this function, you will do the following:

Connect your digital video camera and prepare for recording

m

Record the entire contents of the DV tape to a DVD-RW (VR mode)

m

Select and edit the scenes you want to dub

Taking advantage of the disc’s quick accessibility, select the scenes you want from the recorded DVD-RW (VR mode). You do not have to fast forward or rewind the tape as explained in “Program Edit” (page 74). You can also reset, erase, or change the order of the scenes.

m

Dub the scenes to another disc

After you have selected the scenes, you can dub the selected scenes to another disc of your choice.

76