Recording an Entire DV

Format Tape (One Touch

Dubbing)

+RW -RWVR-RWVideo +R

-R

You can record the entire contents of a DV format tape onto a disc with a single press of the ONE TOUCH DUBBING button. The recorder controls the digital video camera for the whole process, and completes the recording.

◆How chapters are created

The dubbed contents on the disc become one title, and the title is divided into chapters. For a DVD-RW (VR mode), every shooting on the tape becomes a chapter on the disc (Auto Scene Chaptering function). For other discs, the recorder divides the title in either 6 or 15-minute intervals, according to the setting in “Auto Chapter” in Features Setup.

x REC STOP

ONE TOUCH

DUBBING

To stop during recording

Open the remote’s cover and press x REC STOP. Note that it may take a few seconds for the recorder to stop recording.

zHints

•If you set “Finalize Disc” to “Auto” in Features Setup (page 94), the recorded disc (except DVD-RW(VR mode)) will automatically be finalized after recording is finished.

•When you use a DVD-RW (VR mode) and “Add to Edit List” in Features Setup is set to “On” (default), a program for the One Touch Dubbing recording is created and saved in the DV Edit List. You can use the program later to edit and dub the edited contents (page 94).

Notes

•When a blank space between the recordings on the tape continues for more than five minutes, One Touch Dubbing ends automatically.

•The recorder records a blank for five minutes before it stops dubbing. To stop the blank recording, press x

REC STOP.

only) GX700-(RDR Dubbing DV

Follow steps 1 to 6 of “Preparing for recording using the DV IN jack” (page 70), and press ONE TOUCH DUBBING on the remote.

The recorder rewinds the tape and then starts recording the tape contents.

When the recording is finished, the recorder rewinds the tape in the digital video camera.

73