5 Select the IN point by pressing m/M, and press ENTER.

The display for setting the OUT point (end of the scene) appears. The scene starts to play in the background from the IN point.

Select scene (Set OUT point)

Controlling...

IN 0:00:30

OUT 0:00:52

6 Select the OUT point by pressing m/M, and press ENTER.

The display asks if you want to add the selected scene to the Scene List menu. To preview the scene, select “Preview.” To reset either the IN or OUT point, select “Change IN” or “Change OUT,” and repeat from step 5.

Scenes Selection

Do you want to capture the scene between IN 0:00:30 and OUT 0:00:52?

OKCancel

Preview

Change IN

Change OUT

7 Select “OK,” and press ENTER.

A new Scene List menu appears with the selected scene. To add more scenes, select “Add” and repeat from step 5. You can add up to 50 scenes to a tile.

SCENE LIST

Total 0:00:22 Scenes 1

“Change OUT”: Changes the end of the scene. Repeat from step 6.

9 When you finish editing the Scene List, select “OK,” and press ENTER.

The display for entering the title name appears. To enter a new name, select “Enter,” and follow the explanations on page 40.

Title Name

Enter the title name.

DV 11.10.2003 13:30 - 12.11.2003 16:46

OKEnter

10Select “OK,” and press ENTER.

The default title name is fixed, and the display asks if you want to start recording. To change the dubbing mode, select “Dub Mode” and press M/m.

DV Dubbing

 

2.6GB

Change the dubbing mode if necessary.

Select "Start" to start dubbing.

 

 

 

Dub Mode

 

 

 

 

 

 

 

 

 

 

 

SP 0.8GB

 

Start

Cancel

 

 

 

 

 

 

 

 

Data capacity required for the dubbing.

11Select “Start,” and press ENTER.

The recorder starts recording the tape contents as programmed.

• If the recording does not fit due to the

dubbing mode you selected, the display asks

if you want to continue. To change the

dubbing mode, select “Reset” and repeat

only) GX700-(RDR Dubbing DV

1

0:00:30-0:00:52

OK

from step 10. To have the recorder adjust the

Duration 0:00:22

Quit

Add

8 When you finish adding scenes, select the scene you want to edit, and press ENTER.

The sub-menu appears.

“Move”: Changes the scene order. Follow the explanations on the screen to change the order.

“Erase”: Erases the scene. When asked for confirmation, select “OK.”

“Preview”: Plays the selected scene.

“Change IN”: Changes the start of the scene. Repeat from step 5.

dubbing mode, select “Auto Dub Mode.”

• If there is not enough disc space even after

changing the dubbing mode, the display

asks if you want to record halfway. To

continue, select “OK.”

,continued 75