Sony RDR-GX700 Notes, Notes, TV Guide Page

	3 Select the TV guide page number you want to
Notes
	modify, and press ENTER.

•Depending upon the size of the recording being made, the actual interval may vary from the interval selected in “Auto Chapter.” The selected interval should only be used as an approximation to create chapters.

•This function is not available when dubbing DV tapes to DVD-RWs (VR mode) (RDR-GX700 only). Chapter marks are automatically entered where the recordings start on the tape (pages 73, 74, 76).

Features-TV Guide Page		Prog. 4
Sun	PP 000 0	0
Mon	P 000
Tue	P 000
Wed	P 000
Thu	P 000
Fri	P 000
Sat	P 000

TV Guide Page

Some broadcast systems ensure a Teletext service* in which the complete programmes and their data (title, date, channel, recording start time, etc.) are stored day by day. A TV guide page corresponds to each day of the week. When recording a programme, the recorder automatically takes the programme name from the Teletext pages and stores it as the title name. The TV guide page numbers depend entirely on the broadcast itself and may be subject to change. If so, you may have to set those TV guide page numbers manually in the TV Guide Page menu.

* Not available in some areas.

1After step 3 above, select “TV Guide Page” and press , or ENTER.

The TV Guide Page menu appears.

2Select the programme position for which you want to set or change the TV guide page by pressing PROG +/–.

•The TV guide page numbers (Example: P301) appear automatically when the recorder detects them.

Features-TV Guide Page			Prog. 4
	Sun	P 301
	Mon	P 302
	Tue	P 303
	Wed	P 304
	Thu	P 305
	Fri	P 306
	Sat	P 307

•If no page numbers are detected (P000), you have to set the appropriate TV guide page number manually.

Features-TV Guide Page			Prog. 4
	Sun	P 000
	Mon	P 000
	Tue	P 000
	Wed	P 000
	Thu	P 000
	Fri	P 000
	Sat	P 000

4Press the number buttons or </M/m/, to enter the TV guide page number, and press ENTER to confirm the setting.

•If you make a mistake, press CLEAR to re- enter the correct number.

To set or change another TV guide page number, repeat steps 3 and 4 above.

zHint

To view Teletext information on your TV screen during a broadcast, switch to your TV’s tuner by pressing t (TV/video).

Notes

•In step 4 above, enter “000” if you do not want to use the TV guide page number for automatic labelling. The recorder will instead store a default title name (programme position, start time - stop time).

•Refer to the Teletext information on your TV screen to obtain the TV guide page number with programme titles and their start times.

•If the Teletext TV guide has a page which always shows the programmes for the current day, this page should be input for all days.

•If you start recording more than three minutes before the programme is scheduled to start, the correct label information may not be transferred.

•Note that this function may not work correctly with programmes broadcast from some stations.

•If the broadcast system updates the Teletext information at the moment recording starts, the title label may not correspond to the recorded programme. In this case, you may have to manually enter the correct title (page 63).

92