Make the basic adjustments by following the
[/1
</M/m/,,
ENTER
O RETURN
TV [/1
1 Turn on the recorder and your TV. Then switch the input selector on your TV so that the signal from the recorder appears on your TV screen.
The initial settings message appears.
•If this message does not appear, select “Easy Setup” from “SETUP” in the System Menu (“Settings and Adjustments” on page 87).
2 Press ENTER.
Follow the
Easy Setup - Auto Tune
The recorder will automatically capture and store the available TV and Radio channels.
Easy Setup - Clock
The recorder will automatically search for a clock signal. If a clock signal cannot be found, set the clock manually using </M/m/,, and press ENTER.
Easy Setup - TV Type (page 92)
If you have a
Easy Setup - Component Out
If you are using the COMPONENT VIDEO OUT jack, select “On.”
Easy Setup - Line1 Output
To output video signals, select “Video.” To output S video signals, select “S Video.”
To output RGB signals, select “RGB.” Select “Video” to enjoy the SMARTLINK features.
•If you set “Easy Setup - Component Out” to “On,” you cannot select “RGB.”
Easy Setup - Audio Connection
If you connected an AV amplifier (receiver) using a coaxial cord, select “Yes : DIGITAL OUT” and set the digital output signal (page 95).
3 Press ENTER when “Finish” appears.
“Easy Setup” is finished.
To return to the previous step
Press O RETURN.
zHints
•If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 95).
•If you want to run “Easy Setup” again, select “Easy Setup” from “SETUP” in the System Menu (page 101).
20