Front Display
Adjusts the lighting of the front panel display.
Auto | Adjusts to low lighting when |
| power is off. |
|
|
Bright | Maintains bright lighting |
| when power is off. |
|
|
Dimmer | Maintains low lighting |
| regardless of whether power |
| is on or off. |
|
|
Off | Turns off the lighting when |
| power is off. Maintains the |
| lighting when power is on. |
|
|
Command Mode
Changes the command mode of this recorder if other DVD equipment is assigned the same command mode. Be sure to match the command mode of the supplied remote to the setting made here. For details, see “If you have a Sony DVD player or more than one Sony DVD recorder” on page 22.
DVD 1 | Select this if the default |
| command mode conflicts |
| with other DVD equipment. |
|
|
DVD 2 | Select this if the default |
| command mode conflicts |
| with other DVD equipment. |
|
|
DVD 3 | The default command mode |
| of the recorder. |
|
|
Factory Setting
Allows you to return the setup settings to their default settings. Note that all of your previous settings will be lost.
1After step 3 on page 104, select “Factory Setting,” and press ENTER.
2Select “Start,” and press ENTER.
The setup settings return to their default settings.
3Press ENTER when “Finish” appears.
The power automatically turns off and then on again, and the recorder is reset to the factory settings.
When the “Easy Setup” display appears, follow the instructions for Easy Setup (page 23) from step 4.
Select this to run the Easy Setup program.
1 Press SYSTEM MENU while the recorder is in stop mode.
2 Select “Setup,” and press ENTER.
3 Select “Easy Setup,” and press ENTER.
Easy Setup | 10:10 AM |
Follow the guide to make initial settings.
Before you start,
Check that you have made all necessary connections.
Start Cancel
4 Select “Start,” and press ENTER.
5 Follow the instructions for Easy Setup (page 23) from step 5.