“c” and “OTR” light up, and the remaining recording time appears in the front panel display.
When the time counter reaches “0:00,” the recorder stops recording and turns off.
To cancel the Quick Timer
Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode.
To stop recording
Press x STOP twice.
Checking the remaining tape length
You can check recording information, such as remaining tape length or recording mode, etc.
Press DISPLAY while recording.
The information display appears.
Press the button repeatedly to change the display (page 72).
Record
0:30:00
SP
Rem 01:30
Line1
Notes
•The remaining tape length may not be indicated accurately for short tapes such as
•After DISPLAY is pressed, it may take one minute for the remaining tape length to appear.
ARecording status
BTime counter
CRecording mode
DRemaining tape length
EInput source
To check the remaining tape length, set “VCR Function” – “Tape Length” of “Features” in the “Setup” display correctly (page 103).
zHint
You can view the information also in the front panel display. Press TIME/TEXT repeatedly to change the display. Note that TIME/TEXT does not work during