11 Press ENTER.

No Disc Easy Setup

10:10 AM

Easy Setup is finished.

Finish

12 Press ENTER when “Finish” appears.

Easy Setup is finished. All connections and setup operations are complete.

If you use the cable box/satellite receiver control, check that the control works correctly (page 25).

To return to the previous display

Press O RETURN.

zHint

If you want to run Easy Setup again, select “Easy Setup” in the “Setup” display (page 106).

Note

To record TV programs using the timer, you must set the clock accurately.

Checking the cable box/satellite receiver control setting

1 Turn on the recorder and the cable box/ satellite receiver.

2 Point the recorder’s remote at the recorder (not at the cable box/satellite receiver).

3 Press CH +/– and check that the channel changes on the cable box/satellite receiver window.

4 Press the number buttons and check that the channel changes on the cable box/ satellite receiver window.

If you cannot get the recorder to control your cable box/satellite receiver

Check the settings at “Set Top Box Control” in the “Features” setup (page 103).

Check the connection and place the set top box controller near the cable box/satellite receiver (page 12).

If your cable box or satellite receiver still does not operate with this recorder, contact your cable or satellite company to see if they can provide you with a compatible cable box or satellite receiver.

To fix the set top box controller to your cable box/satellite receiver

Once you have confirmed that the set top box controller controls your cable box or satellite receiver, affix it in place.

1Attach the supplied double-sided tape to the set top box controller.

Remove the backings on the double-sided tape.

Settings and Hookups

,continued 25US