+RW
You can record from a connected VCR or similar device. For connection details, see “Connecting Another VCR or Similar Device” on page 27. To record from the equipment that has a DV/D8 output jack (i.LINK jack), use the DV IN jack on the front panel. For details, see page 86.
To record from a USB device connected to the USB jack, see page 89.
Note
To play a disc recorded with this recorder on other equipment, finalize the disc (page 66).
If you set “Auto Finalize” to “On” in the “Features” setup (page 103), the Auto Finalize function works for DVD- RWs (Video mode),
DVD
1 2 3
4 5 6
78 9 
INPUT
0
x STOP
zREC 
REC MODE
1 Press DVD to operate the DVD recorder.
2
3 Press INPUT repeatedly to select an input source according to the connection you made.
The front panel display changes as follows:
LINE1
LINE2 
DV 
USB
When connecting to the LINE 2 IN jacks on the front panel, select “LINE2.”
4 Press REC MODE repeatedly to select the recording mode.
The display changes on the TV screen as follows:
HQ 
HSP 
SP 
LSP
SLP 
EP 
LP
ESP
For details about the recording mode, see page 47.
5 Select the line input audio.
Set “Line Audio Input” of “Audio” setup to “Stereo” or “Main/Sub” in the “Setup” display (page 102).
6 Insert the source tape into the connected equipment and set to playback pause.
7 Press z REC on this recorder and the pause or play button on the connected equipment at the same time.
Recording starts.
To stop recording, press x STOP on this recorder.
Notes
•A video game image may not be recorded clearly.
•The recorder does not record programs with Copy- Never signals. Such recordings stop after a few seconds.
•During recording or recording pause, you cannot change the recording mode.
•You cannot change the input source during recording.