Sony RDR-VXD655 Controlling TVs with the remote

Controlling TVs with the remote

You can adjust the remote control’s signal to control your TV.

Notes

•Depending on the TV, some or all of the buttons below may not work for the TV.

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote, the code number may be reset to the default setting. Set the appropriate code number again.

Code numbers of controllable TVs

If more than one code number is listed, try		Hookups
entering them one at a time until you find the one
that works with your TV.
		and
Manufacturer	Code number	Settings

Sony	01 (default)

Akai	04

AOC	04

Centurion	12

Coronado	03

Curtis-Mathes	12, 14

Daewoo	04, 22

Daytron	03, 12

TV DIGITAL/ ANALOG

TV VOL +/–

TV "/1

Fisher	11
General Electric	04, 06, 10

TV INPUT

TV CH +/–

1 Hold down TV "/1 located at the bottom of the remote.

Do not press "/1 at the top of the remote.

2 With TV "/1 pressed down, enter your

TV’s manufacturer code (see below) using the number buttons.

3 Release TV "/1.

The following buttons are for TV.

,continued 27