To cancel the Quick Timer
Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode.
To stop recording
Press x STOP twice.
Checking the remaining tape length
You can check recording information, such as remaining tape length or recording mode, etc.
Press DISPLAY while recording.
The information display appears.
Press the button repeatedly to change the display (page 74).
Record
0:30:00
SP
Rem 01:30
Ch 110
ARecording status
BTime counter
CRecording mode
DRemaining tape length
ECurrent channel
You can set the timer for a total of 12 programs together with DVD and VCR timer recording, up to one month in advance.
Follow the steps below to set each timer recording items.
Note
Do not operate your cable box or satellite receiver just before or during a timer recording. This may prevent the accurate recording of a program.
|
|
| VIDEO |
|
1 | 2 | 3 |
|
|
4 | 5 | 6 |
|
|
7 | 8 | 9 | DIGITAL/ |
|
| 0 |
| ANALOG |
|
SYSTEM |
|
| TIMER |
|
MENU |
|
| M/m/</,, | VCR |
|
|
| ||
|
|
|
| |
|
|
| ENTER | Recording |
|
|
|
|
x STOP
To check the remaining tape length, set “VCR Function” – “Tape Length” of “Features” in the “Setup” display correctly (page 102).
Notes
•The remaining tape length may not be indicated accurately for short tapes such as
•After DISPLAY is pressed, it may take one minute for the remaining tape length to appear.
1 Press VIDEO to operate the VCR.
2 Insert a tape with its safety tab in place.
,continued 77