Notes
•Recording may not start immediately after z REC is pressed.
•You cannot change the recording mode during recording or recording pause.
•If there is a power failure, the program you are recording may be erased.
•You cannot change the channel or input source during recording.
•You cannot record digital closed captions (page 35).
•Only selected audio can be recorded (page 35).
Recording using the Quick Timer
You can set the recorder to record in
1
2 Press z REC repeatedly to set the duration.
Each press increases the time by 30 minutes, up to eight hours*.
(Normal
| 0:30 |
| 1:00 |
| 7:30 |
| 8:00 |
|
|
|
|
|
|
|
|
|
|
|
| recording) | |
|
|
|
|
|
|
|
|
|
|
|
“c” and “OTR” light up, and the remaining recording time appears in the front panel display.
When the time counter reaches “0:00,” the recorder stops recording and turns off.
*14 hours 30 minutes for DVD+R DL (Double Layer) discs.
To cancel the Quick Timer
Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode.
To stop recording
Press x STOP twice.
Note that it may take a few seconds for the recorder to stop recording.
You can check the recording information such as recording time or disc type.
Press DISPLAY during recording.
The information display appears.
Press the button repeatedly to change the display (page 46).
Record
0:00:03
HQ
Rem 00:59
Ch 1
ADisc type
BRecording status
CRecording time
DRecording mode
ERemaining disc space
FChannel or input source
Creating chapters in a titleThe recorder will automatically divide a recording (a title) into chapters by inserting chapter marks at 5 or
If you do not want to divide titles, select “Off.”
50