The TV screen should show the following:

Watching TV

No Disc

SP

D11.1

By connecting your TV to this recorder, you can watch digital and analog channels on your TV.

Number buttons, SET, · (dot)

1 2 3

4 5 6

7 8 9

0

"/1

CH +/–

DIGITAL/

ANALOG

For example, to select analog channel number

Ch23

2 t 3 t SET

The front panel display should show the following:

The TV screen should show the following:

1 Turn on this recorder.

2 Turn on the TV and switch the TV's input selector so that the signal from the recorder appears on your TV screen.

3 Press DIGITAL/ANALOG to select the broadcast, digital or analog.

4 Press the number buttons to select the channel you want to watch, and press SET.

For example, to select digital channel number D11.1

1 t 1 t t 1 t SET

The front panel display should show the following:

No Disc

SP

Ch23

zHint

You can also select a channel using the CH +/– button.

Notes

•If you do not press the SET button after setting the number buttons, the channel is not changed.

•When you change an analog channel to a digital channel, press the DIGITAL/ANALOG button. Even if you press the ·(dot) button, an analog channel is not changed to digital.

•If you receive new digital channels, or the black screen appears on your TV, set “Auto Preset” of “Tuner Preset” again (page 94).

•Some digital channels do not have a “·” (dot). Refer to the TV program.

•Confirm the digital broadcast content of the channel number received before timer recording. If the recorder receives a digital broadcast without channel number information, the recorder assigns the channel number automatically.

34