(AUDIO DRC)
Narrows the dynamic range of the sound track. Useful for watching movies at low volume late at night.
AMP MENU
CLEAR ENTER -
m M . >
H X x
X/x/c
ENTER O
1
2 Press x/X repeatedly until “CUSTOMIZE” appears, then press ENTER or c.
3 Press x/X repeatedly until “AUDIO DRC” appears, then press ENTER or c.
4 Press x/X to select the setting.
•DRC OFF : no compression of dynamic range.
•DRC STD : reproduces the sound track with the kind of dynamic range that the recording engineer intended.
•DRC MAX : compresses dynamic range fully.
5 Press ENTER or AMP MENU.
The AMP menu turns off.
Note
• AUDIO DRC only applies to Dolby Digital sources.
(DUAL MONO)
You can select the sound you want when the system receives a Dolby Digital multiplex broadcast signal.
Note
•To receive Dolby Digital signal, you need to connect a digital satellite tuner to the system with an optical cable or coaxial cable, and set the digital output mode of the digital satellite tuner to Dolby Digital.
AMP MENU
CLEAR ENTER -
m M . >
H X x
X/x/c
ENTER O
1
2 Press x/X repeatedly until “CUSTOMIZE” appears, then press ENTER or c.
3 Press x/X repeatedly until “DUAL
MONO” appears, then press ENTER or
c.
4 Press x/X to select the sound you want.
•MAIN : plays back only the main channel.
•SUB : plays back only the sub channel.
•MAIN+SUB : mixed playback of the main and sub channels.
•MAIN/SUB : main sound is output from the left speaker and sub sound is output from the right speaker.