To listen to non-preset radio stations
Use manual or automatic tuning in Step 2. For manual tuning, press TUNING + or – repeatedly.
For automatic tuning, press and hold TUNING + or
•If an FM program is noisy, press FM MODE so that “MONO” appears. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.
•To improve reception, reorient the supplied antennas (aerials).
Naming preset stations
You can enter a name for preset station. The name (for example, “XYZ”) appears when the station is selected.
Note that no more than one name can be entered for each preset station.
1 Press TUNER/BAND repeatedly until “FM” or “AM” appears.
The last station you received is tuned in.
2 Press PRESET + or – repeatedly to select the preset station you want to create an index name for.
3 Press TUNER MENU.
4 Press C/X/x/c repeatedly until “Name
In?” appears.
5 Press ENTER.
6 Create a name by using the cursor buttons.
Press X/x to select a character, then press c to move the cursor to the next position. Letters, numbers, and other symbols can be input for a radio station name.
If you make a mistake
Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character.
To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR.
7 Press ENTER.
The station name is stored.
•You can check the frequency by pressing DISPLAY repeatedly.
To change the AM tuning interval
The AM tuning interval can be set to either 10 kHz or 9 kHz.
To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the system. While holding down INPUT SELECTOR, press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.