Adjusting the Delay Between the Picture and Sound
(A/V SYNC)
If picture and sound are not synchronized, you can adjust the delay between picture and sound.
AMP MENU
CLEAR ENTER -
m M . >
H X x
X/x/c
ENTER O
1 Press AMP MENU.
2 Press x/X repeatedly until “CUSTOMIZE” appears, then press ENTER or c.
3 Press X/x repeatedly until “A/V SYNC” appears, then press ENTER or c.
4 Press X/x to select the setting.
•SYNC OFF: does not adjust.
•SYNC ON: adjusts the difference between picture and sound.
5 Press ENTER or AMP MENU.
The AMP menu turns off.
Note
• Depending on the input stream, this function may not be effective.
Changing the Brightness of the Front Panel Display
(DIMMER)
The brightness of the front panel display can be set to one of 2 levels.
AMP MENU
CLEAR ENTER -
m M . >
H X x
X/x/c
ENTER O
1 Press AMP MENU.
2 Press x/X repeatedly until “CUSTOMIZE” appears, then press ENTER or c.
3 Press X/x repeatedly until “DIMMER” appears, then press ENTER or c.
4 Press X/x to select the brightness of the front panel display.
•DIMMER OFF: bright lighting.
•DIMMER ON: low lighting. Turns off the lighting when the power is off.
5 Press ENTER or AMP MENU.
The AMP menu turns off.