The station name is stored.
• You can check the frequency by pressing DISPLAY repeatedly.
To change the AM tuning interval
The AM tuning interval can be set to either 10 kHz or 9 kHz. To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the system. While holding down INPUT SELECTOR, press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.
20US
Press ENTER.
7
Press ENTER.
Create a name by using the cursor buttons.
Press X/x to select a character, then press c to move the cursor to the next position.
Letters, numbers, and other symbols can be input for a radio station name.
If you make a mistake
Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character. To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR.
5
6
3 Press TUNER MENU.
4 Press C/X/x/c repeatedly until “Name In?” appears.
Press PRESET + or – repeatedly to select the preset station you want to create an index name for.
2
Naming preset stations
You can enter a name for preset station. The name (for example, “XYZ”) appears when the station is selected. Note that no more than one name can be entered for each preset station.
1 Press TUNER/BAND repeatedly until “FM” or “AM” appears.
The last station you received is tuned in.
Using the Sleep Timer

You can set the system to turn off at a preset time, so you can fall asleep listening to music. You can preset the time in 10 minutes decrements.

SLEEP

CLEAR ENTER -

m M . >

H X x

O

Press SLEEP.

Each time you press this button, the minutes display (the remaining time) changes as follows:

SLEEP 90M t SLEEP 80M t SLEEP 70M

Rr

SLEEP OFF T SLEEP 10M ..... SLEEP 60M

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly to select the desired time.

To cancel the Sleep Timer function

Press SLEEP repeatedly until “SLEEP OFF” appears.

Note

•This function is only for this system, not for the connected TV or other components.