Automatic outputting of the original sound
xAUTO FORMAT DIRECT AUTO
The auto decoding function automatically detects the type of audio signal being input (Dolby Digital, DTS, or standard 2 channel stereo) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/ encoded, without adding any effects (e.g. reverberation). However, if there are no low frequency signals (Dolby Digital LFE, etc.), it will generate a low frequency signal for output to the subwoofer.
Outputting 2 channel sources like CDs by 5.1channel
xDolby Pro Logic
Dolby Pro Logic produces five output channels from 2 channel sources. This mode performs Pro Logic decoding to the input signal and output to front, center, and surround speakers. Meanwhile, the surround channel becomes monaural.
xDolby Pro Logic II MOVIE/MUSIC
Dolby Pro Logic II produces five
Note
•When the input signal is multi channel source, Dolby Pro Logic and Dolby Pro Logic II MOVIE/MUSIC are canceled and the multi channel source is output directly.
•When the bilingual broadcast sound is input, Dolby Pro Logic and Dolby Pro Logic II MOVIE/MUSIC are not effective.
Using only the front speaker and subwoofer
x2CH STEREO
This mode outputs 2 channel sound regardless of the audio signal type being input.
Outputting sound sources from TV
xNEWS
This mode clearly reproduces human voice in TV programs, such as news programs or dramas.
Outputting 2 channel sources from the front, center, and surround speakers
xMULTI ST.
This mode outputs 2 channel sources from the front, center, and surround speakers simultaneously. The sound that is output from the surround speakers is same as the sound that is output from the front speakers.
•The system memorizes the last sound field selected for each input. In TUNER function mode, the same sound field is memorized for both FM and AM.