Sony RM-BR300 Turning on the Power, Connecting a Video Switcher, To turn on/off the camera using this unit, 3 Turn on the peripheral devices

Operations and Connections

Connecting a Video Switcher

Use a commercially available contact-control type video switcher to switch between the multiple camera signals to be output.

Third to Seventh
		camera
					R	1 2 3 4 5 6 7 8 9
			1	2	3
		OFF	ON
		75	IR SELECT			VISCA RS-422		!
		EXT SYNC IN			S VIDEO	RS-232C OUT		DC IN
								12V	to AC outlet
		TVIDEO				VISCA RS-232C IN
							RS-232C cable
		Second camera					VISCA RS-232C OUT
cable*
					R	1 2 3 4 5 6 7 8 9
			1	2	3
		OFF	ON
		75	IR SELECT			VISCA		!
coaxial		EXT SYNC IN	VIDEO		S VIDEO	RS-232C OUT		DC IN
								12V
		TVIDEO				VISCA RS-232C IN
75-ohm
							RS-232C cable
	cable*
		First camera					VISCA RS-232C OUT
	coaxialohm-
					R	1 2 3 4 5 6 7 8 9
			1	2	3
		OFF	ON
		75	IR SELECT			VISCA		!
		EXT SYNC IN			S VIDEO	RS-232C OUT		DC IN
								12V
	75					VISCA RS-232C IN
							RS-232C cable (supplied)
videocompositeto input		coaxialohm-75cable*					(SONY: 1-590-879-3X)
						VISCA RS-232C
					MODE RS	VISCA	RS-422	TALLY/CONTACT	CONTACT(TALLY) ! ON/OFF
									TALLY
						1	9	1	9
									CONTACT DC IN 12V
									TALLY/CONTACT
									to contact control
									terminal

Video switcher (commercially available)

* You can also use an S-video connecting cable to connect the

S VIDEO connector on the camera and the S-video input connector on the video switcher.

For connection with a video switcher, refer to the Operating Instructions of the switcher.

Turning on the Power

1		2 RESET					PANEL LIGHT
VALUE		LOCK			PANEL	BLACK	PAN-TILT	ONE PUSH
					LIGHT	LIGHT	RESET		AWB		MENU
			RESET
–	+
	R		PRESET			POSITION
BRIGHT		MODE
			SHIFT	1	2	3	4	5	6	7	8
				9	10	11	12	13	14	15	16
–	+		L/R	STD	REV
	B		DIRECTION			CAMERA
		AUTO
FOCUS		AUTO	POWER	1	2	3	4	5	6	7
		MANUAL
		ONE PUSH
NEAR	FAR	AF

POWER CAMERA

1 Connect the camera to an AC outlet.The power of the camera is turned on and the POWER lamp lights.

The camera will automatically pan and tilt and be reset to the position stored in POSITION 1 (Pan/tilt reset action).

2 Press the ON/OFF switch on this unit to turn it on. The CAMERA button representing the camera whose power was turned off last lights. (CAMERA 1 button lights by default.)

3 Turn on the peripheral devices.

Notes

•Be sure to turn on the power of the camera before the power of this unit. Otherwise, the unit cannot recognize the connected camera.

•Do not touch the joystick when turning on the power of the unit. Doing so may affect the confirmation of the origin.

To turn on/off the camera using this unit

As long as the camera is connected to an AC outlet, you can turn the camera on or off with the POWER button on this unit.

While holding down the POWER button, press the CAMERA button corresponding to the camera whose power you want to turn on/off.

When you turn the power off using this unit, the POWER lamp turns off and the STANDBY lamp lights on the camera.

GB 12 Turning on the Power