Started Getting

Speaker Setup

To specify the balance and level of the speakers

1Press TEST TONE on the remote.

You will hear the test tone from each speaker in sequence.

2Press AMP MENU repeatedly to display <<LEVEL >> on the front panel display.

3Sit at your listening position and select the item to be adjusted using M/m.

Items adjusted in << LEVEL >>

-Balance of the front and rear speakers

-Volume level of the center and rear speakers and subwoofer

4Adjust the volume level so that the volume of the test tone from each speaker sounds the same using

</,.

The adjusted value will appear on the front panel display.

5Repeat Steps 3 and 4 to adjust other parameters within <<LEVEL>>.

If you do not operate the remote for a few seconds, the value turns off and is stored in the system.

6Press TEST TONE again to turn off the test tone.

xBalance

You can vary the balance of each speaker as follows. The default adjustments are in the parentheses.

F ___I___ (center) (front speakers)

Adjust the balance between the front left and right speakers (6 dB (L) to 6 dB (R), 1 dB steps).

R ___I___ (center) (rear speakers)

Adjust the balance between the rear left and right speakers (6 dB (L) to 6 dB (R), 1 dB steps).

xLevel

You can vary the level of each speaker as follows. The default adjustments are in the parentheses.

C. LEVEL (0 dB) (center speaker level)

Adjust the level of the center speaker (–6 dB to +6 dB,

1dB steps).

R. LEVEL (0 dB) (rear speakers level)

Adjust the level of the rear speakers (–6 dB to +6 dB,

1dB steps).

S. W. LEVEL (0 dB) (subwoofer level)

Adjust the level of the subwoofer (–6 dB to +6 dB,

1dB steps).

zYou can adjust the level of center/rear speakers and subwoofer directly

Use the CENTER/REAR/WOOFER +/– buttons on the remote.

Notes

When you select an item, the sound cuts off for a moment.

Depending on the settings of other speakers, the subwoofer may output excessive sound.

To adjust the volume of all the speakers at one time

Use the VOLUME control.

Using the optional speaker stands

For greater flexibility in the positioning of the speakers, use the optional WS-FV10 floor stand (available only in certain countries).

WS-FV10 floor stand

16