Settings for Sound (AUDIO SETUP)

Select “AUDIO SETUP” after pressing DVD SETUP. “AUDIO SETUP” allows you to select the sound track. The default settings are underlined.

AUDIO SETUP

 

TRACK SELECTION:

OFF

To set, press , then ENTER .

To quit, press SETUPDVDSETUP. .

xTRACK SELECTION

Gives the sound track which contains the highest number of the channels priority when you play a DVD on which multiple audio formats are recorded. If multiple audio channels are recorded in PCM, DTS, MPEG AUDIO or Dolby Digital format, the higher-numbered channel audio recorded in PCM, DTS, MPEG AUDIO or Dolby Digital format is played.

•OFF : No priority given.

•AUTO : Priority given.

Notes

•When you set this item to “AUTO,” the language may change depending on the “AUDIO” settings in “LANGUAGE SETUP.” The “TRACK SELECTION“ setting has higher priority than that of “AUDIO” settings in “LANGUAGE SETUP” (page 44).

•If PCM, DTS, MPEG AUDIO and Dolby Digital sound tracks have the same number of the highest channels, the system selects PCM, DTS, Dolby Digital and MPEG AUDIO sound tracks, in this order.

•Depending on the DVD, the audio with priority may be predetermined. In this case, you cannot give priority to the DTS, MPEG AUDIO or Dolby Digital format by selecting “AUTO.”

Settings for Speakers

(SPEAKER SETUP)

Select “SPEAKER SETUP” after pressing DVD SETUP. To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Then use the test tone to adjust the speaker volumes to the same level.

SPEAKER SETUP

SIZE:

 

 

 

 

 

 

 

 

 

 

DISTANCE:

 

 

 

 

 

BALANCE:

 

 

 

 

 

LEVEL:

 

 

 

 

 

OFF

TEST TONE:

 

FRONT:

 

 

 

 

YES

 

CENTER:

 

 

 

 

YES

 

REAR:

 

BEHIND(LOW)

SUBWOOFER:YES

To set, press , then ENTER .

To quit, press SETUPDVDSETUP. .

xSIZE

When you do not connect center or rear speakers, or move the rear speakers, set the parameters for CENTER and REAR. Since the front speaker and subwoofer settings are fixed, you cannot change them. The default settings are underlined.

•FRONT

—YES

•CENTER

—YES: Normally select this.

—NONE: If you will not connect a center speaker, select this.

•REAR

—BEHIND (LOW), BEHIND (HIGH), SIDE (LOW), SIDE (HIGH): Specify the position and height to implement the Digital Cinema Surround modes in the “Virtual Multi Dimension” sound field (p. 20) properly.

—NONE: If you will not connect a rear speaker, select this.

•SUBWOOFER

—YES

Notes

•When you select an item, the sound cuts off for a moment.

•Depending on the settings of other speakers, the subwoofer may output excessive sound.

Adjustments and Settings

49