Sony S300 Resuming Playback from the Point Where You Stopped the Disc (Resume Play)

The system stores the point where you stopped the disc and when “RESUME” appears on the front panel display, you can resume playback from that point.

As long as you do not open the disc tray, Resume Play is available even if you turn the power off.

H x

1 2 3

4 5 6

7 8 9

Notes

•Resume Play may not be available depending on the DVD.

•Resume Play is not available in Shuffle or Program Play mode.

•Depending on where you stopped the disc, the system may resume playback from a different point.

•The point where you stopped playing is cleared when:

–you open or close the disc tray

–you disconnect the AC power cord without turning the power off

–you change the play mode

–you start playback after selecting a title, chapter or track

–you change the settings of “TV TYPE” in ”SCREEN SETUP” in the setup display

–you change the settings of “PARENTAL CONTROL” in ”CUSTOM SETUP” in the setup display

Discs Playing

>10 10/0

H x

1While playing a disc, press x to stop playback.

“RESUME” appears in the front panel display and “When playing next time, disc restarts from point you stopped.” appears on the TV screen.

If “RESUME” does not appear, Resume Play is not available.

2Press H.

The system starts playback from the point where you stopped the disc in Step 1.

zTo play from the beginning of the disc

When the playing time appears on the front panel display before you start playing, press x again to reset the playing time, then press H.