Copying images to your computerStage 2: Connecting the camera and your computer

With Windows XP, the AutoPlay wizard appears on the desktop.

“USB Mode Mass Storage” appears on the screen of the camera.

1 To the (USB) ·

A/V OUT terminal

Dedicated USB cable

2To a USB jack

Access indicators*

When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera.

Wait for a while.

*During communication, the access indicators turn red. Do not operate the computer until the indicators turn white.

If “USB Mode Mass Storage” does not appear, set [USB Connect] to [Mass Storage] (page 53).

When the software (supplied) has been installed, the [Import Images] screen (page 69) may be displayed. In this case, you can import images using “Picture Motion Browser” directly.

Stage 3-A: Copying images to a computer

For Windows 2000, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 63.

For Windows XP, when the wizard screen does not appear automatically, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 63.

This section describes an example of copying images to a “My Documents” folder.

computer your Using

61